Home
Presentation
Product range
Advantages
Accessories
Tariffs
Other links
Contact us

©  Forestballer 1999 - 2005

The proposed accessories are particularly adapted to Forestballer.

Forestballer-OUT 1 Grip with clamp: grip for a tractor 3 point system. It takes on the ground and transports the bundles of 1stere without difficulty. The tractor driver, without going down from its seat, loads from 50 to 100 steres / day, or even more, to carry them until a place of storage or on line. During this time, the tractor does not wait, unutilised, the making of the steres by the foresters.
Forestballer-OUT 21 Grip with central hook: acts in the same way but does not leave a place between the arranged bundles. Forestballer-OUT 22 Grip with 2 independent hooks: acts the same way and can take 2 steres side by side. With a 1 front hook grip and a 2 back hooks grip, one unloads 3 steres together, which makes it possible to unload even more quickly.
Forestballer-ON Grip for front fork: is an adaptable accessory on the tractor front fork. It is ideal for the loading on agricultural trailers and makes it possible to charge in places where semi-trailers do not have any access. It avoids the use of a grip or a hook.
Forestballer Porteur Forestballer Porteur for system 3 points exists in 3 options: - to put logs or stakes in bundle using a tractor, - to put logs or stakes in bundle using a tractor, - to gather the remainders of logs at the end of the season.
1) Forestballer Porteur (PTR) used with complete Forestballer, which makes Forestballer universal by sometimes allowing the setting in bundle with tractor, sometimes without tractor, - Forestballer can charged empty and be transported filled up logs, - Forestballer can be deposited on the ground, empty or full, - the bundle can be deposited without effort thanks to the design of the Carrier.
2) Use of Forestballer Porteur Combined (PTRC) equipped with an articulated cradle, which allows same work as said above, the tractor operator does not have to go down from its seat to put down the bundle on the ground.
3) Use of Forestballer Porteur with an autonomous Half Forestballer, which allows same work that PTR, without more effort. The Half Forestballer can't roll, empty it will be carried from one place to another.
Forestballer-Palettiseur Forestballer Palettiseur does not require a tractor to finish stacking: - It allows the packing of logs from 25 to 50 cm on traditional pallet without side wall. - Ideal for storage in dead season then to deliver on pallet by avoiding cutting to residence and the sweeping of the chips by the deliveryman. - Light to be handled : laying flat, one fills it of vertical logs before binding them with the same bonds and lever tensioner that those used with Forestballer. - One opens it after having bound the first stage of logs and one rests it with the top to carry out a second stage. Then one makes a third stage on the second... etc. - to facilitate the installation of the logs which will thus rest the ones against the others, one belongs before pallet by a 12 cm diameter log. Log driven out at the end of the palletization to give the pallet flat. Capacities of the various diameters : Diameter 116,5 cm = 1 stère with : 2 stages of 50 cm 3 stages of 33 cm 4 stages of 25 cm Diameter 101 cm = 0,8 m3 with : 2 stages of 50 cm 3 stages of 33 cm Diameter 94 cm = 1 stère with : 3 stages of 50 cm 5 stages of 33 cm Diameter 80 cm =1/2 stère with : 2 stages of 50 cm 3 stages of 33cm. Rectangular palletizer without loss of place : This tool amllows to put logs on all the surface of a pallet without side and without loss of place on the plates of transport. Traditional format: 1m20 X 1 m, another format on request. A mode of special tying (patented) makes it possible to preserve the rectangular form. Tying is a little longer than with the cylindrical palettising. If the links can be retied on a cylindrical palettisage, that is difficult for a rectangular palettising. It is thus useful to palletize little before forwarding. Note : The logs can be obtained by vertical slicing of horizontal bundles in 1 m length. That without much physical effort, the slicer almost descending from it only weight. They are also worked with a sawing-dividing machine with conveyor belt which brings the logs in the hands of the palletizer. It is possible, with only Forestballer, easy of employment, to make bundles with logs of 0 m 33, 0 m 50, or 1 m, or 2 m, (even 3 meters). These bundles can be easily taken again by various ways : manual devil for the small bundles, fork-lift truck, grips, hook and finally not very expensive: by hanging each of the two bonds of the bundle to one of the two hooks hung at the end of the tractor charger. What is done very well with the bundles of a half stere and one stere.

For more information, contact us.

Home   News   Presentation   Product range   Advantages   Accessories   Tariffs    Other links   Contact us